Tuesday, July 13, 2010

Arturo Fuente #2

I've begun the 2nd of 3 Cigar Box guitars. This is the neck for #2. Cut from a scrap piece of maple I measured out 1/2 scale and marked it with a sharpie. Leaving enough room for nut and tuners on 1 side, box and resonator on the other. Yup you read correctly. I'm going to attempt a resonator on this one. This will also be different as nothing on this guitar will be from a guitar.
No Tuners, Bridge, Nut etc. this will all be Home Depot Parts and a Cigar Box.

No comments: